E-SHOP - TOOLS / Catalogue of milling cutters / End mills / End mills - short, 1 tooth cut over centre, PM

End mills - short, 1 tooth cut over centre, PM
End mills - short, 1 tooth cut over centre, PM
Straight shank with clamping flat (Weldon) acc. to DIN 1835 B. up_weldon Extra high performance high speed steel produced by powder metallurgy. It has a homogeneous structure resulting in higher dimension stability and longer tool life. It is applicable for machining of materials with very high strength and materials hard to machine, such as Titanium and its alloys. The milling cutters made from this material are delivered with AlTiN coating as a standard. m_HSSEPM
Helix angle = 30°. Rake angle = 10°. g_30x10
For machining of materials of medium and higher strength (up to 1200 MPa), surface roughness Ra 3,2 and more, in common application can be applied as roughing and finishing tool at the same time. typ_hrp
Feed direction posibillity. posuv_dolu_strana
 
 
D
k 12 Diameter 		d
h 6 Diameter of fixative element 		l
Lenght of cutting part 		L
Lenght of mill 		Z
Number of teeth 		Code In stock
6 6 13 57 4
128517P.060
Yes
8 10 19 69 4
128517P.080
Yes
10 10 22 72 4
128517P.100
Yes
12 12 26 83 4
128517P.120
Yes
14 12 26 83 4
128517P.140
Yes
16 16 32 92 4
128517P.160
Yes
18 16 32 92 4
128517P.180
Yes
20 20 38 104 4
128517P.200
On request
22 20 38 104 5
128517P.220
On request
25 25 45 121 5
128517P.250
On request
28 25 45 121 5
128517P.280
On request
30 25 45 121 5
128517P.300
On request
32 32 53 133 6
128517P.320
On request

Using for materials

< 1100 MPa Tool steels low alloyed
< 1100 MPa Tool steels high alloyed
> 1100 MPa Tool and treated steels
>240 HB Cast iron
<850 MPa Chrome-nickel alloys
<1200 MPa Titanium, titanium alloys
128517P
DIN 844
ISO 1641
Code : 128517P