Half circle milling cutters concave

Straight bore with standard keyway and driving slot.	High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.
Rake angle = 10°.

D js 16 Diameter	S Width of milling cutter	d H 7 Diameter of fixative element	R H 11 Radius	Z Number of teeth	Code	In stock
50	6	16	1	14	820070.010	Yes
50	6	16	1,25	14	820070.0125	Yes
50	8	16	1,6	14	820070.016	Yes
50	9	16	2	14	820070.020	Yes
63	10	22	2,5	12	820070.025	Yes
63	12	22	3	12	820070.030	Yes
63	12	22	3,15	12	820070.0315	Yes
63	16	22	3,5	12	820070.035	Yes
63	16	22	4	12	820070.040	Yes
63	18	22	4,5	12	820070.045	Yes
63	20	22	5	12	820070.050	On request
80	24	27	6	12	820070.060	Yes
80	24	27	6,3	12	820070.063	Yes
80	24	27	7	12	820070.070	Yes
80	32	27	8	12	820070.080	Yes
100	32	32	9	12	820070.090	Yes
100	36	32	10	12	820070.100	Yes
100	40	32	12	12	820070.120	Yes
100	40	32	12,5	12	820070.125	Yes
125	50	32	16	10	820070.160	Yes
125	60	32	20	10	820070.200	Yes