Half circle milling cutters convex

Straight bore with standard keyway and driving slot.	High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.
Rake angle = 10°.

Z Number of teeth	d H 7 Diameter of fixative element	S Width of milling cutter	D js 16 Diameter	R k 11 Radius	Code	In stock
14	16	2	50	1	810070.010	Yes
14	16	2,5	50	1,25	810070.0125	Yes
14	16	3,2	50	1,6	810070.016	Yes
14	16	4	50	2	810070.020	Yes
12	22	5	63	2,5	810070.025	Yes
12	22	6	63	3	810070.030	Yes
12	22	6,3	63	3,15	810070.0315	Yes
12	22	7	63	3,5	810070.035	Yes
12	22	8	63	4	810070.040	Yes
12	22	9	63	4,5	810070.045	Yes
12	22	10	63	5	810070.050	Yes
12	27	11	80	5,5	810070.055	Yes
12	27	12	80	6	810070.060	On request
12	27	12,6	80	6,3	810070.063	Yes
12	27	13	80	6,5	810070.065	Yes
12	27	14	80	7	810070.070	Yes
12	27	15	80	7,5	810070.075	Yes
12	27	16	80	8	810070.080	Yes
12	32	17	100	8,5	810070.085	Yes
12	32	18	100	9	810070.090	Yes
12	32	19	100	9,5	810070.095	Yes
12	32	20	100	10	810070.100	On request
12	32	22	100	11	810070.110	Yes
12	32	24	100	12	810070.120	Yes
12	32	25	100	12,5	810070.125	Yes
12	40	28	125	14	810070.140	Yes
12	32	32	125	15	810070.150	Yes
12	32	32	125	16	810070.160	Yes
12	40	36	125	18	810070.180	Yes
12	32	40	125	20	810070.200	Yes
12	40	50	160	25	810070.250	On request