Narrow side and face milling cutters

Straight bore with standard keyway and driving slot.	Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Helix angle = 10°. Rake angle = 12°.
For machining of soft materials, for example aluminium and non-ferrous metals.
Cutting edges on the face and perimeter of the side and face cutter.

D js 16 Diameter	S k 11 Width of milling cutter	d H 7 Diameter of fixative element	Z Number of teeth	Code	In stock
63	1,6	22	16	726275.063016	Yes
63	2	22	16	726275.063020	Yes
63	2,5	22	16	726275.063025	Yes
63	3	22	16	726275.063030	On request
63	4	22	16	726275.063040	Yes
63	5	22	16	726275.063050	Yes
63	6	22	16	726275.063060	Yes
80	1,6	27	20	726275.080016	Yes
80	2	27	20	726275.080020	On request
80	2,5	27	20	726275.080025	Yes
80	3	27	20	726275.080030	Yes
80	4	27	20	726275.080040	Yes
80	5	27	20	726275.080050	Yes
80	6	27	20	726275.080060	Yes
100	1,6	32	24	726275.100016	Yes
100	2	32	24	726275.100020	Yes
100	2,5	32	24	726275.100025	Yes
100	3	32	24	726275.100030	Yes
100	4	32	24	726275.100040	Yes
100	5	32	24	726275.100050	Yes
100	6	32	24	726275.100060	Yes
100	8	32	24	726275.100080	Yes
125	1,6	32	26	726275.125016	Yes
125	2	32	26	726275.125020	Yes
125	2	32	26	726275.125025	Yes
125	3	32	26	726275.125030	Yes
125	4	32	26	726275.125040	Yes
125	5	32	26	726275.125050	Yes
125	6	32	26	726275.125060	Yes
125	8	32	26	726275.125080	On request
125	10	32	26	726275.125100	On request
160	2	40	30	726275.160020	Yes
160	2,5	40	30	726275.160025	Yes
160	3	40	30	726275.160030	Yes
160	4	40	30	726275.160040	Yes
160	5	40	30	726275.160050	Yes
160	6	40	30	726275.160060	On request
160	8	40	30	726275.160080	Yes
160	10	40	30	726275.160100	Yes
160	12	40	30	726275.160120	Yes