Side and face milling cutters

Straight bore with standard keyway and driving slot.	Cast steel with very high performance and good toughness, applicable especially for tools of bigger diameters and side and face milling cutters.
Helix angle = 10°. Rake angle = 10°.
Universal usage. Suitable for materials up to strength 900 MPa.
Cutting edges on the face and perimeter of the side and face cutter.

D js 16 Diameter	S s 10 Width of milling cutter	d H 7 Diameter of fixative element	Z Number of teeth	Code	In stock
63	8	22	12	720373.06308	Yes
63	10	22	12	720373.06310	Yes
63	12	22	12	720373.06312	Yes
80	8	27	14	720373.08008	Yes
80	10	27	14	720373.08010	Yes
80	10	22	14	720373.0801022	Yes
80	12	27	14	720373.08012	Yes
100	10	27	14	720373.1001027	On request
100	12	27	14	720373.10012	Yes
100	12	22	14	720373.1001222	Yes
100	14	27	14	720373.1001227	Yes
100	14	32	14	720373.10014	Yes
100	14	27	14	720373.1001427	Yes
100	16	32	14	720373.10016	Yes
125	12	32	16	720373.12512	Yes
125	14	32	16	720373.12514	Yes
125	14	27	16	720373.1251427	Yes
125	14	40	16	720373.1251440	Yes
125	16	32	16	720373.12516	Yes
125	16	40	16	720373.1251640	Yes
125	18	40	16	720373.1251840	Yes
160	14	40	18	720373.16014	Yes
160	16	40	18	720373.16016	On request
160	18	40	18	720373.16018	Yes