E-SHOP - TOOLS / Catalogue of milling cutters / Side and face cutters / Side and face milling cutters, fine teeth

Side and face milling cutters, fine teeth
Side and face milling cutters, fine teeth
Straight bore with standard keyway and driving slot. up_dira_unas High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa. m_hss
Helix angle = 10°. Rake angle = 8°. g_10x08
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6. typ_h
Cutting edges on the face and perimeter of the side and face cutter. ostri_kotouc_obvodcelo
 
 
D
js 16 Diameter 		S
k 11 Width of milling cutter 		d
H 7 Diameter of fixative element 		Z
Number of teeth 		Code In stock
250 8 40 38
730270.25008
Yes
250 10 40 38
730270.25010
Yes
250 12 40 38
730270.25012
Yes

Using for materials

< 600 MPa General construction steels
< 850 MPa Steel castings
<240 HB Cast iron
<850 MPa Copper-zinc, tin alloys
<500 MPa Aluminium, Aluminium cast
730270
DIN 885 A

Code : 730270