Slot drills - short, centre cutting

Straight shank with clamping flat (Weldon) acc. to DIN 1835 B.	Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.
Helix angle = 25°. Rake angle = 12°.
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction posibillity.

D e 8 Diameter	d h 6 Diameter of fixative element	l Lenght of cutting part	L Lenght of mill	Code	In stock
2	6	4	48	220418.020	On request
2,5	6	5	49	220418.025	Yes
3	6	5	49	220418.030	Yes
3,5	6	6	50	220418.035	Yes
4	6	7	51	220418.040	On request
4,5	6	7	51	220418.045	Yes
5	6	8	52	220418.050	On request
5,5	6	8	52	220418.055	Yes
6	6	8	52	220418.060	On request
6,5	10	10	60	220418.065	On request
7	10	10	60	220418.070	Yes
7,5	10	10	60	220418.075	Yes
8	10	11	61	220418.080	On request
8,5	10	11	61	220418.085	Yes
9	10	11	61	220418.090	On request
9,5	10	11	61	220418.095	Yes
10	10	13	63	220418.100	Yes
10,5	12	13	70	220418.105	Yes
11	12	13	70	220418.110	On request
11,5	12	13	70	220418.115	Yes
12	12	16	73	220418.120	On request
13	12	16	73	220418.130	Yes
14	12	16	73	220418.140	On request
15	12	16	73	220418.150	On request
16	16	19	79	220418.160	Yes
17	16	19	79	220418.170	On request
18	16	19	79	220418.180	On request
19	16	19	79	220418.190	On request
20	20	22	88	220418.200	Yes
22	20	22	88	220418.220	Yes
24	25	26	102	220418.240	Yes
25	25	26	102	220418.250	On request
25	20	26	96	220418.25020	On request
26	25	26	102	220418.260	Yes
28	25	26	102	220418.280	Yes
28	20	26	96	220418.28020	On request
30	25	26	102	220418.300	Yes
32	32	32	112	220418.320	Yes
36	32	32	112	220418.360	Yes
40	32	38	118	220418.400	Yes